SM6T2 DISHWASHERMODELSM6T2 ML-110857SM6T2701 S. RIDGE AVENUETROY, OHIO 45374-0001937 332-3000www.hobartcorp.comFORM 34047 Rev. A (July 2000)
– 10 –DOs AND DON'Ts FOR YOUR NEW HOBART WAREWASHERDO assure proper water hardness.DO pre-scrap dishes thoroughly.DO use only detergents recommen
– 11 –TROUBLESHOOTINGTo avoid a service call, check symptoms and related possible causes. If machine still does not operateproperly, contact Service.
– 12 –SYMPTOM POSSIBLE CAUSEInadequate rinse. 1. Dirty line strainer causing reduced water flow. Turn off watersupply, remove strainer cap, withdraw
– 2 –Installation, Operation, and Care ofMODEL SM6T2 DISHWASHERSAVE THESE INSTRUCTIONSGENERALThe SM6T2 dishwasher is an electrically controlled, semi-
– 3 –INSTALLATIONImmediately after unpacking the dishwasher, check for possible shipping damage. If the machine isfound to be damaged, save the packa
– 4 –
– 5 –
– 6 –
– 7 –OPERATIONINTERLOCKThe hoods are interlocked with the Control Handle (Fig. 1) which prevents operation of the automaticwash and rinse cycle with a
– 8 –AUTOMATIC DISHWASHINGPre-scrap dishes thoroughly to remove large food particles and debris. Never use steel wool on warethat is to be loaded int
– 9 –CLEANINGWARNING: DISCONNECT THE ELECTRICAL POWER SUPPLIES BEFORE CLEANING ORSERVICING THIS MACHINE.The machine must be thoroughly cleaned at the
Comments to this Manuals