INSTRUCTIONSFORM 18261 Rev. E (Jan. 2002)D SERIESREACH-INREFRIGERATORS & FREEZERSD SERIESREACH-INS701 S. RIDGE AVENUETROY, OHIO 45374-0001937 332-
– 10 –If the Defrost Timer's Battery Loses PowerIf the SET CLOCK, PROGRAM and DEFROST ON lights are all blinking (Fig. 15), the backup powersuppl
– 11 –Fig. 16DEFROST TIMER — Freezer units built between 1991 and 1997were equipped with a defrost timer (Fig. 16) preset for four 23 – 25minute defro
– 12 –FORM 18261 Rev. E (Jan. 2002) PRINTED IN U.S.A.MAINTENANCECLEANINGCabinetClean the inside of the cabinet and the doors weekly with a warm water
–2–© HOBART CORPORATION, 1991D Series Reach-In Refrigerators & FreezersINSTALLATIONUNPACKINGImmediately after unpacking the reach-in, check for po
–3–ASSEMBLYSome components can be removed to allow the cabinet to pass through short or narrow doorways.The door handle can be removed as follows:1. I
– 4 –LEGS OR CASTERSWARNING: THE CABINET MUST BE BLOCKED ANDSTABLE BEFORE INSTALLING LEGS OR CASTERS.Legs (Fig. 4)To install the legs, raise and bloc
– 5 –Condensate EvaporatorD Series units are equipped with an automatic condensate evaporator that requires no drain connection.ELECTRICAL CONNECTIONS
– 6 –ELECTRONIC DEFROST TIMER (when equipped)If your freezer is equipped with an electronic Defrost Timer, it islocated in a control box behind the tr
– 7 –To Change the Defrost Duration and Bypass the Setting of the Time ClockBegin with the SET CLOCK light blinking rapidly, indicating normal Operati
– 8 –How to Set a Custom Defrost ScheduleBegin with the defrost timer on normal Operation Mode: The SET CLOCK light is blinking rapidly andthe PROGRA
– 9 –Program ReviewDuring normal Operation Mode, with the SET CLOCK light blinking rapidly . . .Press the SET button until the SET CLOCK, PROGRAM an
Comments to this Manuals