© HOBART 2008 F25230 (Rev. A, May 2008)Page 1 of 8LX/LXi, LXG/LXiG, AND SR24H DISHWASHERSDWT2 DRAIN WATER TEMPERING KIT ML-130137All kits must be ins
F25230 (Rev. A, May 2008) © HOBART 2008Page 2 of 8Installation (LX/LXi and LXG/LXiG)WARNING: DISCONNECT THEELECTRICAL POWER TO THEMACHINE AND FOLLOW
© HOBART 2008 F25230 (Rev. A, May 2008)Page 3 of 8Plumbing ConnectionWARNING: PLUMBING CONNECTIONS MUSTCOMPLY WITH APPLICABLE SANITARY, SAFETYAND PLU
F25230 (Rev. A, May 2008) © HOBART 2008Page 4 of 82. Route wiring harness per Fig 9, Fig 10, and Fig11. Route wiring harness in a manner to ensureit
© HOBART 2008 F25230 (Rev. A, May 2008)Page 5 of 84. Replace existing service cover with onesupplied in kit (919277). The power cord willhave to be d
F25230 (Rev. A, May 2008) © HOBART 2008Page 6 of 8Operation1. Make sure cold water supply line valve is openand pressure gage is set to 15 psi flowin
© HOBART 2008 F25230 (Rev. A, May 2008)Page 7 of 85. Connect the other two wires marked as Drain1and Drain2 in harness 814267 to drain solenoidvalve
F25230 (Rev. A, May 2008) © HOBART 2008Page 8 of 812. Slide strain relief bracket into the panel per Fig.11. 13. Attach the strain relief bracket to
Comments to this Manuals