Hobart ML-19689 User Manual download pdf (Page 3)

– 3 –

PL-56170

LEG (15", 18" or 21")

LEG

LEG END CAP

LEG STUD

NEOPRENE FOOT

FOOT

Fig. 1

Fig. 2

LEGS (Figs. 1, 2)

The four leg assemblies are packed in a separate

carton for shipment. The standard legs (5

/8" high)

allow the rim of the feed pan on the table model to

be 27" above the table surface. These legs have

neoprene feet and require assembly. To assemble

/8" high legs: Slide the Leg Stud through the Leg

End Cap and the Leg; then thread the Leg Stud into

the base of the machine (Fig. 2). Do not overtighten;

the legs need only be hand-tight. Thread the

Neoprene Foot into the Leg Stud (Fig. 2).

Floor model choppers are equipped with optional

15", 18" or 21" legs. Each Leg is one piece and

threads into the base of the machine at the four

corners. These Legs can be adjusted by threading

the Feet in or out as necessary (Fig. 2) to level and

stabilize the chopper.

1 2 3 4 5 6 7 8

No comments

Hobart ML-19689 User Manual Page 3