Hobart ML-19689 User Manual download pdf (Page 8)

– 8 –

MOTPMYSESUACELBISSOP

.etarepot’nowreppohC.detcennoctonrewoplacirtcelE

.nwolbesufrodeppirtrekaerbtiucriC

sikcolretni;ylreporpdelbmessatonsinapelbavomer,A2374ledomnO

.degagneton

.ecivreStcatnoc,noitautisehtydemertonodsnoitseggusevobaehtfI

FORM 34747 (Feb. 2002) PRINTED IN U.S.A.

MAINTENANCE

LUBRICATION

During normal operation, gear case oil may require changing due to condensate mixing with the oil.

Gear case oil that has mixed with condensate water will have a milky brown color. If this is present, the

oil should be replaced.

To change the gear case oil, place a suitable catch pan under the

machine and remove the Drain Plug (Fig. 3 or Fig. 4). When old oil

is completely drained, replace the Drain Plug. Fill the gear case with

21 fluid ounces of Mobilgear 634 as follows: Remove the Plug Button

(Fig. 3 or Fig. 4); then remove the Plastic Oil-Fill Plug (Fig. 6). Pour

the proper amount of Mobilgear 634 into the elbow. The gear case is

full when the oil is at the bottom thread level of the elbow (Fig. 6).

Thread the Plastic Oil-Fill Plug back into the elbow, finger-tight.

Press the Plug Button back into the hole of the chopper housing. The

chopper requires no other lubrication maintenance.

TROUBLESHOOTING

SERVICE

Contact your local Hobart-authorized Service Office for any repairs or adjustments needed on this

equipment.

Fig. 6

PL-56171

PLASTIC OIL-FILL PLUG

FULL LINE

1 2 3 4 5 6 7 8

No comments

Hobart ML-19689 User Manual Page 8