FORM 34726 (Nov. 2001)MODEL HM1200MICROWAVE OVENML-126824HM1200MICROWAVE OVENPOWERLEVELPROGSTAGEHIGHDEFROST12123456X2STARTSTOP/RESET701 S. RIDGE AVENU
– 10 –Custom Programming the X2 Key for Multiple PortionsThe oven must be set on Program Unlock to perform functions on this page (refer to page 12).a
– 11 –COOKING USING A PROGRAMMED MEMORY KEY AND THE X2 (DOUBLE PORTION) KEYThis example shows how the oven runs after a Memory key has been programmed
– 12 –PROGRAM LOCKThis procedure locks the Memory keys' power levels, stage(s) and timesettings. The oven can be locked only if it is unlocked.
– 13 –PROGRAMMING BEEP TONE: LOUDNESSBeep Tone Loudness can have one of the following settings: 3 Loud, 2 Moderate, 1 Soft, 0 Silent.1. Open the door
– 14 –DISPLAYING THE CYCLE COUNTThe model HM1200 Microwave Oven incorporates a cycle counter which keeps track of the total numberof cycles that the o
– 15 –CLEANINGWARNING: UNPLUG ELECTRICAL POWER CORD BEFORE PERFORMING ANY CLEANING ORMAINTENANCE.Keep the inside of the oven clean. If pieces of food
– 16 –MAINTENANCEREPLACING THE CAVITY LIGHT BULBIf the Cavity Light Bulb burns out, you can replace it yourself.WARNING: UNPLUG ELECTRICAL POWER CORD
– 2 –IMPORTANT SAFETY INSTRUCTIONSWhen using electrical appliances, basic safety precautions must be followed, including the following:WARNING: TO RE
– 3 –PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY1. Do not attempt to operate this oven with the door open since open-door ope
– 4 –Installation, Operation and Care ofMODEL HM1200 MICROWAVE OVENSAVE THESE INSTRUCTIONSGENERALMicrowave heat is generated inside the food rather th
– 5 –LOCATIONPlace the oven on a suitable countertop, shelf or table with a smooth, flat and stable surface. Do notplace the oven in a hot or damp ar
– 6 –ELECTRICAL CONNECTIONThe cord and plug of this microwave oven must be connected to a separate circuit rated at 120 Volts,60 Hertz, 20 Amps, Singl
– 7 –OPERATIONModel HM1200 Microwave OvenDISPLAY AND KEYPADMemory Keys are preset at the factory to HIGH power level and single stage cooking for thes
– 8 –MANUAL HEATINGWhen the oven is connected, a beep sounds. The display remains idle (blank) until you open the doorand [ 0 ] displays for 1 minute
– 9 –PROGRAMMING MEMORY KEYS 1 – 6The oven must be set on Program Unlock to perform the functions on this page (refer to page 12).Programming Memory K
Comments to this Manuals