Hobart LT1 ML-104239 User Manual download pdf (Page 3)

– 3 –

Installation, Operation and Care of

Model LT1 DISHWASHER

SAVE THESE INSTRUCTIONS

GENERAL

The Model LT1 Dishwasher is a low temperature (140°F recommended, 120°F minimum), chemical

sanitizing, rack-type dishwasher for use with accessory 20" x 20" racks. It is equipped with a

⁄4

horsepower thermally protected (internal) pump motor. The motor must cool to restart the pump.

The revolving stainless steel ball bearing wash / rinse arms above and below provide thorough

distribution of water jets to all dishware surfaces. Arms are easily removable for cleaning and are

interchangeable. Stainless steel tubing connects upper and lower systems.

All three doors open together when the spring counter-balanced handle is raised. Durable door glides

provide easy opening and closing.

The LT1 can wash up to 40 racks per hour. Water usage is 1.7 gallons per rack.

After initial manual fill, the machine automatically

washes a rack of dishes, drains the wash water,

and then refills with fresh water for the rinse

cycle. The rinse water remains in the machine

for the next wash cycle. At the proper time

during each cycle, an appropriate amount of

detergent, rinse aid, and sanitizer chemicals are

pumped into the wash tank.

Cycle timing is as follows:

Wash . . . . . . . . 40 seconds

Drain . . . . . . . . 10 seconds

Flush . . . . . . . . . 3 seconds

Fill . . . . . . . . . . . 9 seconds

Rinse . . . . . . . . 20 seconds

The stainless steel front panel is available as an

option.

MODEL LT1 DISHWASHER

SHOWN WITH OPTIONAL FRONT PANEL

1 2 3 4 5 6 7 8 ... 15 16

No comments

Hobart LT1 ML-104239 User Manual Page 3